Session Data

Array
(
    [form_inputs] => Array
        (
            [initial] => Array
                (
                    [Company] => CM3 Building Solutions, Inc.
                    [Contact_First] => Joe
                    [Contact_Last] => Kowalick
                    [Contact_Email] => 
                    [Contact_Phone] => 
                    [contactid] => 
                    [Zip] => 19034
                    [Email] => RKownurko@cm3inc.com
                    [Phone] => 2153228400
                    [place_id] => 
                    [customerid] => 165330
                    [mascustnum] => CM31903
                )

            [gm_search] => Array
                (
                    [gm_account_no] => 165330
                    [mas_cust_no] => CM31903
                )

            [mas_search] => Array
                (
                    [mas_cust_no] => CM31903
                    [mas_cust_exists] => true
                )

            [billing] => Array
                (
                    [Company] => CM3 Building Solutions, Inc.
                    [Contact_First] => Joe
                    [Contact_Last] => Kowalick
                    [Address1] => 185 Commerce Dr
                    [Address2] => 
                    [Address3] => 
                    [City] => Fort Washington
                    [State] => PA
                    [Zip] => 19034
                    [Country] => USA
                    [Email] => joekowalick@cm3inc.com
                    [Phone] => (215) 322-8400
                )

            [shipping] => Array
                (
                    [ShipToName] => CM3 Building Solutions, Inc.
                    [Address1] => 185 Commerce Dr
                    [Address2] => 
                    [Address3] => 
                    [Address4] => 
                    [Address5] => 
                    [City] => Fort Washington
                    [State] => PA
                    [Zip] => 19034
                    [Country] => USA
                    [Email] => joekowalick@cm3inc.com
                    [Phone] => (215) 322-8400
                )

            [leadid] => 
            [summary] => Array
                (
                    [SalesPersonNo] => 0028
                    [ProductLine] => FX
                    [forecasting_likelihood] => medium
                    [forecasting_expected_close_date] => 05/17/2024
                    [generate_quote] => true
                    [keep_sonum] => Q046936
                    [change_notes] => 
                    [delivery_disclaimer] => true
                    [tax_free] => true
                    [lead_time] => Varies greatly based on product and stock availability.
                    [email_quote_to] => joekowalick@cm3inc.com
                    [template_id] => 366
                    [email_quote_subject] => Dental Aerosol Extractors - Ready to Ship
                    [files] => 
                    [email_product_literature] => true
                    [includedPDFs] => Array
                        (
                            [0] => {QUOTE}
                            [1] => /mnt/product_media/fumextractors/pdfs/fx-wm-series-selection-guide_10-20-23.pdf
                            [2] => /mnt/product_media/fumextractors/pdfs/fx-ha-fume-arms.pdf
                            [3] => /mnt/product_media/fumextractors/pdfs/FX-HA-0610 Drawing.pdf
                            [4] => /mnt/product_media/fumextractors/pdfs/FX-HA-0614 Drawing.pdf
                            [5] => /mnt/product_media/fumextractors/pdfs/fxp-arm-lkt-assembly.pdf
                            [6] => /mnt/product_media/fumextractors/pdfs/FX-WM-NFFR Drawing.pdf
                            [7] => /mnt/product_media/fumextractors/pdfs/FXD-NF-WM8-W.pdf
                            [8] => /mnt/product_media/fumextractors/pdfs/FXD-NF-WM8-R.pdf
                            [9] => /mnt/product_media/blueox/pdf/OX3000_Series.pdf
                            [10] => /mnt/product_media/blueox/pdf/drawing/BOP-EYEBLTS Installation M11.pdf
                            [11] => /mnt/product_media/blueox/pdf/MAG Gauge Install Instructions for OX2500 and OX3000 units.pdf
                            [12] => /mnt/product_media/fumextractors/pdfs/fx-pt-portables-pulsing.pdf
                            [13] => /mnt/product_media/fumextractors/pdfs/FX-PT-NFFR Drawing.pdf
                            [14] => /mnt/product_media/fumextractors/pdfs/FXF-PTDDT-HEPA Cut Sheet (GF).pdf
                            [15] => /mnt/product_media/fumextractors/pdfs/FX-DDT-HEPAF Drawing.pdf
                            [16] => /mnt/product_media/fumextractors/pdfs/FX-PT-SBNF Drawing.pdf
                            [17] => /mnt/product_media/nordfab/pdf/Angle Flange Adapter.pdf
                            [18] => /mnt/product_media/nordfab/pdf/Quick-Fit Clamp.pdf
                            [19] => /mnt/product_media/nordfab/pdf/Duct Pipe.pdf
                            [20] => /mnt/product_media/nordfab/pdf/tech_data_pdf/3202_Adjustable_Nipple.pdf
                            [21] => /mnt/product_media/nordfab/pdf/Nordfab_In-line_Spark_Trap_2.0_brochure_ACS.pdf
                            [22] => /mnt/product_media/nordfab/pdf/Y Branch.pdf
                            [23] => /mnt/product_media/nordfab/pdf/Rubber and Urethane Hose.pdf
                            [24] => /mnt/product_media/nordfab/pdf/Hose Adapter.pdf
                            [25] => /mnt/product_media/nordfab/pdf/tech_data_pdf/3249_QF_Machine_Adapter.pdf
                            [26] => /mnt/product_media/nordfab/pdf/Duct Elbows.pdf
                            [27] => quote_bundle_separator
                        )

                    [act] => submit_quote
                )

        )

    [last_completed_step] => 5
    [gm_account_no] => 165330
    [mas_cust_no] => CM31903
    [mas_cust_exists] => true
    [exportid] => 68675
    [masquotenum] => Q046936
    [not_in_mas] => 1
)

POST Data

Array
(
    [SalesPersonNo] => 0028
    [ProductLine] => FX
    [forecasting_likelihood] => medium
    [forecasting_expected_close_date] => 05/17/2024
    [generate_quote] => true
    [keep_sonum] => Q046936
    [change_notes] => 
    [delivery_disclaimer] => true
    [tax_free] => true
    [lead_time] => Varies greatly based on product and stock availability.
    [email_quote_to] => joekowalick@cm3inc.com
    [template_id] => 366
    [email_quote_subject] => Dental Aerosol Extractors - Ready to Ship
    [email_quote_body] => 
Hello <<&dear>>,
We've been working with dentists to develop an aerosol suction unit, and we are now in production.
 
All orders ship in one week.
<<&quote_link>> to view your distributor pricing.
We have 40 years in
the air filtration industry--not the dental industry.  Having your dental
industry knowledge would bring a lot to our partnership.
I've attached some product
overview literature and pictures of dentists using our products.




If you're interested, please
give me a call.


Sincerely,



<<&RepName>>



FumeXtractors
11088 Gravois Industrial Ct.
Saint Louis, MO 63128

866 651-9762 Ext. <<&RepPhoneExt>>

866 422-4099 Fax

<<&RepEmail>>

https://fumextractors.com
FumeXtractors is a proud product of Air Cleaning Specialists, Inc.
    [files] => 
    [email_product_literature] => true
    [includedPDFs] => Array
        (
            [1] => /mnt/product_media/fumextractors/pdfs/fx-wm-series-selection-guide_10-20-23.pdf
            [2] => /mnt/product_media/fumextractors/pdfs/fx-ha-fume-arms.pdf
            [3] => /mnt/product_media/fumextractors/pdfs/FX-HA-0610 Drawing.pdf
            [4] => /mnt/product_media/fumextractors/pdfs/FX-HA-0614 Drawing.pdf
            [5] => /mnt/product_media/fumextractors/pdfs/fxp-arm-lkt-assembly.pdf
            [6] => /mnt/product_media/fumextractors/pdfs/FX-WM-NFFR Drawing.pdf
            [7] => /mnt/product_media/fumextractors/pdfs/FXD-NF-WM8-W.pdf
            [8] => /mnt/product_media/fumextractors/pdfs/FXD-NF-WM8-R.pdf
            [9] => /mnt/product_media/blueox/pdf/OX3000_Series.pdf
            [10] => /mnt/product_media/blueox/pdf/drawing/BOP-EYEBLTS Installation M11.pdf
            [11] => /mnt/product_media/blueox/pdf/MAG Gauge Install Instructions for OX2500 and OX3000 units.pdf
            [12] => /mnt/product_media/fumextractors/pdfs/fx-pt-portables-pulsing.pdf
            [13] => /mnt/product_media/fumextractors/pdfs/FX-PT-NFFR Drawing.pdf
            [14] => /mnt/product_media/fumextractors/pdfs/FXF-PTDDT-HEPA Cut Sheet (GF).pdf
            [15] => /mnt/product_media/fumextractors/pdfs/FX-DDT-HEPAF Drawing.pdf
            [16] => /mnt/product_media/fumextractors/pdfs/FX-PT-SBNF Drawing.pdf
            [17] => /mnt/product_media/nordfab/pdf/Angle Flange Adapter.pdf
            [18] => /mnt/product_media/nordfab/pdf/Quick-Fit Clamp.pdf
            [19] => /mnt/product_media/nordfab/pdf/Duct Pipe.pdf
            [20] => /mnt/product_media/nordfab/pdf/tech_data_pdf/3202_Adjustable_Nipple.pdf
            [21] => /mnt/product_media/nordfab/pdf/Nordfab_In-line_Spark_Trap_2.0_brochure_ACS.pdf
            [22] => /mnt/product_media/nordfab/pdf/Y Branch.pdf
            [23] => /mnt/product_media/nordfab/pdf/Rubber and Urethane Hose.pdf
            [24] => /mnt/product_media/nordfab/pdf/Hose Adapter.pdf
            [25] => /mnt/product_media/nordfab/pdf/tech_data_pdf/3249_QF_Machine_Adapter.pdf
            [26] => /mnt/product_media/nordfab/pdf/Duct Elbows.pdf
            [27] => quote_bundle_separator
        )

    [act] => submit_quote
    [not_in_mas] => true
)

Debug Data

Array
(
    [0] => Array
        (
            [sku] => 
            [name] => Modular System:  You can add an additional 6" fume arm, filter base or spark box at any time
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [1] => Array
        (
            [sku] => FX-WM-2HP-1PH-115/230V KIT
            [name] => FumeXtractor Wall-mounted 

Motor: 2 HP, Single Phase, 115V / 230V (dual voltage),

Amps: 16.5 / 8.3,

Color: RAL9004,

(1) 6", (1) 8", or (2) 6" Connection



Blower Includes:

Starter

Push Button Start and Stop

Plug

Cord



Package Includes:

2HP Blower - $1695.00

Filter and Filter Base - $895.00

6" x 10' Fume Arm - $995.00

6" x 10' Fume Arm - $995.00
            [qty] => 1
            [price] => 4,580.00
            [cost] => 794.00
            [pdfFileURL] => 
        )

    [2] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [3] => Array
        (
            [sku] => FXO-WM-FLTRKIT
            [name] => KIT - 1x FXO-WM-FLTR-BASE (Filter base for Fumextractor Wall Mount with filter base bracket) and 1x FX-WM-NFFR (WMF Cartidge Filter 250 Sq Feet, Fire Retardant Nanofiber Media - MERV 15 REVERSE FLOW)



Qty - 1
            [qty] => 1
            [price] => 0.00
            [cost] => 295.00
            [pdfFileURL] => 
        )

    [4] => Array
        (
            [sku] => FXO-WM-SPRKTRP
            [name] => FumeXtractor wall mount spark trap. Includes Aluminum Mesh Pre-Filter for FX-WM-SPRK, Washable (FX-WMSP-ALPF)
            [qty] => 0
            [price] => 695.00
            [cost] => 307.50
            [pdfFileURL] => 
        )

    [5] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [6] => Array
        (
            [sku] => FX-HA-0607
            [name] => FumeXtractors 6" x 7' Hanging Fume Arm

With Mounting Bracket
            [qty] => 0
            [price] => 995.00
            [cost] => 366.00
            [pdfFileURL] => 
        )

    [7] => Array
        (
            [sku] => FX-HA-0610
            [name] => FumeXtractors 6" x 10' Hanging Fume Arm

Mounting Bracket Included



Qty - 2
            [qty] => 1
            [price] => 0.00
            [cost] => 370.00
            [pdfFileURL] => 
        )

    [8] => Array
        (
            [sku] => FX-HA-0614
            [name] => FumeXtractors 6" x 14' Hanging Fume Arm

Mounting Bracket Included
            [qty] => 0
            [price] => 1,345.00
            [cost] => 415.00
            [pdfFileURL] => 
        )

    [9] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [10] => Array
        (
            [sku] => FXP-ARM-LKT
            [name] => Light Kit with 20' cord for FumeXtractor Arm

MR16 LED Light Bulb 7w, Approximately 4000 hours
            [qty] => 0
            [price] => 110.00
            [cost] => 45.00
            [pdfFileURL] => 
        )

    [11] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [12] => Array
        (
            [sku] => FX-WM-NFFR-K
            [name] => Replacement Cartidge Filter for FX-WM-2HP-1PH-115/230V: Wall Mounted FumeXtractor

15.07" OD x 10.7" ID x 26" HGT Cylindrical Cartridge	

16.5" x 18" Rectangular Flange-Closed	

Inner & Outer Expanded Metal	

11.75" ID x 0.5" x 0.5" Gasket, Gasket On Top Pan	 

250 sq ft of 80/20 Blended Cellulose FR w/ Nano

MERV 15	

Reverse Flow
            [qty] => 0
            [price] => 237.00
            [cost] => 99.44
            [pdfFileURL] => 
        )

    [13] => Array
        (
            [sku] => FX-WMSP-ALPF
            [name] => Aluminum Mesh Pre-Filter for FX-WM-SPRK, Washable
            [qty] => 0
            [price] => 44.00
            [cost] => 29.50
            [pdfFileURL] => 
        )

    [14] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [15] => Array
        (
            [sku] => FXD-NF-WM8-W
            [name] => Nordfab Quick-Fit Laser Welded Clamp-together Duct System for Wall Mount - 8"

Wall Penetration:

(1) 3202-0800-10000 8" Adjustable sleeve

(1) 3210-0890-11200 8" x 90 Degree Elbow 

(2) 3200-0800-10000 8" Pipe 

(1) 3204-0800-10000 8" No loss stack head 

(5) 3260-0800-10000 8" Clamps
            [qty] => 0
            [price] => 615.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [16] => Array
        (
            [sku] => FXD-NF-WM8-R
            [name] => Nordfab Quick-Fit Laser Welded Clamp-together Duct System for Wall Mount - 8"

Roof Penetration:

(1) 3202-0800-10000 8" Adjustable Sleeve

(1) 3210-0890-11200 8" x 90 Degree Elbow

(2) 3200-0800-10000 8" Pipe

(1) 3204-0800-10000 8" No loss stack head

(5) 3260-0800-10000 8" Clamps
            [qty] => 0
            [price] => 635.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [17] => Array
        (
            [sku] => 
            [name] => See attached drawing for mounting suggestion
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [18] => Array
        (
            [sku] => OX3000
            [name] => Blue Ox Model OX3000, 3,000 CFM Media Filtration System.

Cabinet: 24"W x 24"T x 72" Long - 16GA CRS

Power: 115V 60Hz Single Phase 10.2 Amps

Filter Stage 1: (2) Pleated Pre Filters 24" x 24" x 4" 35%

Filter Stage 2: (2) Primary Filters 24" x 24" x 22" 65% 8 Pocket Bag Filter
            [qty] => 2
            [price] => 2,463.00
            [cost] => 1,600.90
            [pdfFileURL] => 
        )

    [19] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [20] => Array
        (
            [sku] => BOP-EYEBLTS
            [name] => Eyebolts 4 Eyebolts (Installed on unit at the Factory)

Used In OX1100 / OX2500 / OX3000
            [qty] => 2
            [price] => 70.00
            [cost] => 45.00
            [pdfFileURL] => 
        )

    [21] => Array
        (
            [sku] => BOP-MTGKIT
            [name] => Mounting Kit Chain, Q-Links, & installed eyebolts

(4ea. 5' Lengths of chain)

Used In OX1100 / OX2500 / OX3000
            [qty] => 0
            [price] => 177.00
            [cost] => 115.00
            [pdfFileURL] => 
        )

    [22] => Array
        (
            [sku] => BOP-LBRKTS
            [name] => "L" Mounting Brackets (set of 2)

Used In OX1100 / OX2500 / OX3000
            [qty] => 0
            [price] => 177.00
            [cost] => 115.00
            [pdfFileURL] => 
        )

    [23] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [24] => Array
        (
            [sku] => BOP-OILDRAIN-WB
            [name] => Installed Oil/Coolant Drain & Storage Bottle

OX2500 (1) Per Unit

T-Series require (2) per Unit
            [qty] => 0
            [price] => 167.00
            [cost] => 100.00
            [pdfFileURL] => 
        )

    [25] => Array
        (
            [sku] => BOP-MAG02
            [name] => Magnehelic Pressure Gauge 0-2" W.C.  (Filter Change Guide)

Used In OX1100 / OX2500 / OX3000 / OX3500C
            [qty] => 1
            [price] => 147.00
            [cost] => 95.00
            [pdfFileURL] => 
        )

    [26] => Array
        (
            [sku] => BOP-2530SIL-RK
            [name] => RETROFITTED Silencer - Reduces Noise by 6-8 Decibels

This silencer is retrofitted to be attached in the FIELD.

** Specify if using existing louver or changing to non-directional grill at time of ordering. **

Used In OX2500 / OX2500D / OX3000

(Cannot use existing louver with OX3500 or OX4000)
            [qty] => 0
            [price] => 339.00
            [cost] => 220.00
            [pdfFileURL] => 
        )

    [27] => Array
        (
            [sku] => BOP-2530SIL
            [name] => Silencer Reduces Noise by 6-8 Decibels

FACTORY Installed Model

** Specify 4-way Directional Louver or Non-Directional Grill at the time of ordering **

Used In OX2500 / OX2500D / OX3000 / OX3500C
            [qty] => 0
            [price] => 254.00
            [cost] => 165.00
            [pdfFileURL] => 
        )

    [28] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [29] => Array
        (
            [sku] => BOF-4404
            [name] => 24 x 24 x 4 Pleated Prefilter, MERV 10

(Priced Each / Sold in Cartons of 6)
            [qty] => 0
            [price] => 12.70
            [cost] => 7.62
            [pdfFileURL] => 
        )

    [30] => Array
        (
            [sku] => BOF-4404-AM
            [name] => 24 x 24 x 4" Aluminum Mesh Pre-filter

Replaces Pleated Pre-Filter in OX2500 / OX3000 / OX3500C

Spark Trap in FX Robot Hoods
            [qty] => 0
            [price] => 162.50
            [cost] => 97.50
            [pdfFileURL] => 
        )

    [31] => Array
        (
            [sku] => BOF-442268
            [name] => Fiberglass Bag, 24" X 24" X 22" MERV 11 (65%) 

8.0 Pockets, Gasket None, Loops None, Std Header, Nom Size

(Priced Each / Sold in Cartons of 4)
            [qty] => 0
            [price] => 67.42
            [cost] => 40.45
            [pdfFileURL] => 
        )

    [32] => Array
        (
            [sku] => BOF-442298
            [name] => Fiberglass Bag, 24" X 24" X 22" MERV 15 (95%) 

8.0 Pockets, Gasket None, Loops None, Std Header, Nom Size

(Priced Each / Sold in Cartons of 4)
            [qty] => 0
            [price] => 81.51
            [cost] => 48.91
            [pdfFileURL] => 
        )

    [33] => Array
        (
            [sku] => 
            [name] => Base only

A HEPA filter and frame is needed when welding on stainless steel
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [34] => Array
        (
            [sku] => FX-PT-P-2HP-KIT
            [name] => Portable Fume Extractor with Pulse Cleaning System with Enclosed DOL Motor Starter

2HP/115V/60Hz/1Ph

1100 CFM

Dimension: 43.8" x 31.4" x 69"

Aluminum Mesh Pre-Filter for Spark Arrestor

Cartrige Filter Included
            [qty] => 1
            [price] => 4,146.00
            [cost] => 1,958.00
            [pdfFileURL] => 
        )

    [35] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [36] => Array
        (
            [sku] => FX-PT-NFFR-K
            [name] => Replacement Cartridge Filter for the FX-PT-P-2HP: Portable Fume Extractor with Pulse Cleaning System

15.07" OD x 10.7" ID x 26" HGT Cylindrical Cartridge	

16.5" x 18" Rectangular Flange-Closed	

Inner & Outer Expanded Metal	

11.75" ID x 0.5" x 0.5" Gasket, Gasket On Top Pan	 

250 sq ft of 80/20 Blended Cellulose FR w/ Nano	MERV 15

For Most Applications
            [qty] => 0
            [price] => 237.00
            [cost] => 99.44
            [pdfFileURL] => 
        )

    [37] => Array
        (
            [sku] => FX-PT-ALPF
            [name] => 17 5/16 x 21 1/4 x 1 (Exact) Thrift-Aire Aluminum Pre-Filter for FumeXtractor Portable



TA17.312521.251E
            [qty] => 0
            [price] => 52.00
            [cost] => 24.93
            [pdfFileURL] => 
        )

    [38] => Array
        (
            [sku] => FXF-PTDDT-HEPA
            [name] => HEPA Afterfilter for FX-PT-P and FX-DDT

19 7/8" x 18" x 5 7/8" @ 99.97% HEPA

GlasFloss Part# MAGGB19P18A5CX



*** NOTE: DOES NOT INCLUDE FRAME, REPLACEMENT FILTER ONLY ***
            [qty] => 0
            [price] => 405.00
            [cost] => 166.96
            [pdfFileURL] => 
        )

    [39] => Array
        (
            [sku] => FXF-PTDDT-HEPAF
            [name] => HEPA Afterfilter Kit for FX-PT-P and FX-DDT



Kit includes 1x FXF-PTDDT-HEPA (filter) and 1x FXF-PTDDT-HFRAME (frame)
            [qty] => 0
            [price] => 502.00
            [cost] => 205.00
            [pdfFileURL] => 
        )

    [40] => Array
        (
            [sku] => FX-PT-SBNF-K
            [name] => Replacement Cartridge Filter for FX-PT-P-2HP: Portable Fume Extractor with Pulse Cleaning System

15.07" OD x 10.7" ID x 26" HGT Cylindrical Cartridge

16.5" x 18" Rectangular Flange-Closed	

Inner & Outer Expanded Metal	

11.75" ID x 0.5" x 0.5" Gasket, Gasket On Top Pan	

130 sq ft of Spunbond w/ Nano

MERV 15

For Oily Metals/Abrasive Particulate
            [qty] => 0
            [price] => 275.00
            [cost] => 120.10
            [pdfFileURL] => 
        )

    [41] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [42] => Array
        (
            [sku] => 3250-0800-10000
            [name] => 08" ANGLE FLANGE ADAPTER, GALVANIZED STEEL

L=3.5"



***Drawing needed
            [qty] => 1
            [price] => 85.11
            [cost] => 55.32
            [pdfFileURL] => 
        )

    [43] => Array
        (
            [sku] => 3260-0800-10000
            [name] => 08" CLAMP W/ PIN, GALVANIZED STEEL

STANDARD NITRILE SEAL
            [qty] => 7
            [price] => 18.30
            [cost] => 10.52
            [pdfFileURL] => 
        )

    [44] => Array
        (
            [sku] => 3200-0800-10000
            [name] => 08" x 59.06" LONG PIPE, GALVANIZED STEEL

22 GAUGE
            [qty] => 3
            [price] => 72.09
            [cost] => 46.86
            [pdfFileURL] => 
        )

    [45] => Array
        (
            [sku] => 3202-0800-10000
            [name] => 08" ADJ. NIPPLE, GALVANIZED STEEL

11" LENGTH
            [qty] => 1
            [price] => 29.55
            [cost] => 19.21
            [pdfFileURL] => 
        )

    [46] => Array
        (
            [sku] => 3255-0800-10000
            [name] => Spark Trap In Line MS 18ga 8QF



Weight: 28.6lbs



W=14" L=44"
            [qty] => 1
            [price] => 1,548.88
            [cost] => 1,006.77
            [pdfFileURL] => 
        )

    [47] => Array
        (
            [sku] => 3221-08XX-10000
            [name] => 08" Y-BRANCH, GALVANIZED STEEL

A=8"QF   B=6"HA   D=6"HA
            [qty] => 1
            [price] => 232.38
            [cost] => 151.05
            [pdfFileURL] => 
        )

    [48] => Array
        (
            [sku] => 3280-0600-00000
            [name] => 06" RUBBER HOSE-BLACK; FLEXIBLE RUBBER HOSE W/STEEL COIL 

PRICED PER FOOT SOLD IN 5' INCREMENTS



***Cut down to 2.5' per leg of the Y branch**
            [qty] => 5
            [price] => 15.05
            [cost] => 9.78
            [pdfFileURL] => 
        )

    [49] => Array
        (
            [sku] => 3282-0600-10000
            [name] => 06" HOSE ADAPTER, GALVANIZED STEEL
            [qty] => 2
            [price] => 37.86
            [cost] => 24.61
            [pdfFileURL] => 
        )

    [50] => Array
        (
            [sku] => 3249-0600-10000
            [name] => 06" MACHINE ADAPTER, GALVANIZED STEEL



QF: 5.96 RAW END O.D. / 5.89 RAW END I.D.



*** TBD ***
            [qty] => 2
            [price] => 37.06
            [cost] => 24.09
            [pdfFileURL] => 
        )

    [51] => Array
        (
            [sku] => 3260-0600-10000
            [name] => 06" CLAMP W/ PIN, GALVANIZED STEEL

STANDARD NITRILE SEAL
            [qty] => 4
            [price] => 14.95
            [cost] => 9.72
            [pdfFileURL] => 
        )

    [52] => Array
        (
            [sku] => 3210-0890-11200
            [name] => 08" 90DEG. ELBOW, GALVANIZED STEEL

1.5 CLR / 22   GAUGE

TANGENT: 2.25"
            [qty] => 1
            [price] => 174.28
            [cost] => 113.28
            [pdfFileURL] => 
        )

    [53] => Array
        (
            [sku] => 
            [name] => 
            [qty] => 0
            [price] => 0.00
            [cost] => 0.00
            [pdfFileURL] => 
        )

    [54] => Array
        (
            [sku] => FX-WM-2HP-1PH-115/230V KIT
            [name] => FumeXtractor Wall-mounted 

Motor: 2 HP, Single Phase, 115V / 230V (dual voltage),

Amps: 16.5 / 8.3,

Color: RAL9004,

(1) 6", (1) 8", or (2) 6" Connection



Includes:

2HP Blower

Starter

Push Button Start and Stop

Plug

Cord
            [qty] => 1
            [price] => 1,895.00
            [cost] => 794.00
            [pdfFileURL] => 
        )

)

Array
(
    [1] => /mnt/product_media/fumextractors/pdfs/fx-wm-series-selection-guide_10-20-23.pdf
    [2] => /mnt/product_media/fumextractors/pdfs/fx-ha-fume-arms.pdf
    [3] => /mnt/product_media/fumextractors/pdfs/FX-HA-0610 Drawing.pdf
    [4] => /mnt/product_media/fumextractors/pdfs/FX-HA-0614 Drawing.pdf
    [5] => /mnt/product_media/fumextractors/pdfs/fxp-arm-lkt-assembly.pdf
    [6] => /mnt/product_media/fumextractors/pdfs/FX-WM-NFFR Drawing.pdf
    [7] => /mnt/product_media/fumextractors/pdfs/FXD-NF-WM8-W.pdf
    [8] => /mnt/product_media/fumextractors/pdfs/FXD-NF-WM8-R.pdf
    [9] => /mnt/product_media/blueox/pdf/OX3000_Series.pdf
    [10] => /mnt/product_media/blueox/pdf/drawing/BOP-EYEBLTS Installation M11.pdf
    [11] => /mnt/product_media/blueox/pdf/MAG Gauge Install Instructions for OX2500 and OX3000 units.pdf
    [12] => /mnt/product_media/fumextractors/pdfs/fx-pt-portables-pulsing.pdf
    [13] => /mnt/product_media/fumextractors/pdfs/FX-PT-NFFR Drawing.pdf
    [14] => /mnt/product_media/fumextractors/pdfs/FXF-PTDDT-HEPA Cut Sheet (GF).pdf
    [15] => /mnt/product_media/fumextractors/pdfs/FX-DDT-HEPAF Drawing.pdf
    [16] => /mnt/product_media/fumextractors/pdfs/FX-PT-SBNF Drawing.pdf
    [17] => /mnt/product_media/nordfab/pdf/Angle Flange Adapter.pdf
    [18] => /mnt/product_media/nordfab/pdf/Quick-Fit Clamp.pdf
    [19] => /mnt/product_media/nordfab/pdf/Duct Pipe.pdf
    [20] => /mnt/product_media/nordfab/pdf/tech_data_pdf/3202_Adjustable_Nipple.pdf
    [21] => /mnt/product_media/nordfab/pdf/Nordfab_In-line_Spark_Trap_2.0_brochure_ACS.pdf
    [22] => /mnt/product_media/nordfab/pdf/Y Branch.pdf
    [23] => /mnt/product_media/nordfab/pdf/Rubber and Urethane Hose.pdf
    [24] => /mnt/product_media/nordfab/pdf/Hose Adapter.pdf
    [25] => /mnt/product_media/nordfab/pdf/tech_data_pdf/3249_QF_Machine_Adapter.pdf
    [26] => /mnt/product_media/nordfab/pdf/Duct Elbows.pdf
)

Array
(
)

{"exportid":"68675","import_result":null,"import_error":"","fileurl":"GMImport_68675_1713813410_23263.acsopa","email_result":"email not sent","goldmine_import":null,"mas_import":"","generate_quote":"true","goldmine_company":"CM3 Building Solutions, Inc.","goldmine_email":"joekowalick@cm3inc.com","goldmine_phone":"(215) 322-8400","mas_quote_number":"Q046936","mas_customer_number":"CM31903"}